shotgun lathe and plaster wall penetration test

#Shotgun lathe and plaster wall penetration test how to
#Shotgun lathe and plaster wall penetration test update
#Shotgun lathe and plaster wall penetration test free

If you find that the force you’re exerting is damaging plaster (and you want to save the plaster) slip a wood shingle behind the pry bar. Use leverage and work the trim away from the wall until you find a nail. Then, gently hammer the bent end of the pry bar into this opening. Score the joints, and these will be far easier to disassemble.įirst, choose an inconspicuous door or window, ascend the ladder, and push the putty knife (or tap the handle lightly with a hammer) until the blade slides between the wall and woodwork. Two small pieces can make up what looks like a single profile. The window and door casings are nailed to the jambs, and additional built-up moldings may be nailed to the outer edges of the flat casing. You are reversing the process used to assemble the interior trim from its components. Taking moldings apart is like pressing the rewind button on your VCR. Cutting through the film of paint does as much to loosen the woodwork as a lot of grunting, so don’t skip this step.

#Shotgun lathe and plaster wall penetration test free

To free up the woodwork from wallpaper that may be overlapping it or from layers of paint “gluing” it to the wall, put a new blade in your utility knife and score the perimeters of the windows, doors, and baseboards. Large power-hacksaw blades (shown here) make ideal tools. Use a hacksaw blade to cut hidden or stubborn nails. Indelible pen (to mark the original location on the back of trim)Īfter this small investment, sweat equity will take you the rest of the way.Hacksaw blade, one end covered in a holder or adhesive tape.Two 16″ pry bars, flat on both ends, are necessities. Even so, dismantling woodwork is a job well within the reach of a beginner.

Low-Tech Toolsįorget about screwdrivers! They gouge the wood. Here’s how we suggest you approach the job of delicate dismantling. Moldings split, even when you approach the job methodically, and you won’t find identical patterns or woods at the local lumberyard. Layers of paint come off faster, and your back feels better, when you place the work across sawhorses. Another reason to remove trim is to strip paint in a safe, ventilated space, instead of the rooms you inhabit. If you’re taking the walls down to bare studs in order to replaster, add plumbing, or insulate, then “taking it all off” may actually save time. Perhaps you need to pop off a strategic molding to run new wiring or recover lost window weights.

#Shotgun lathe and plaster wall penetration test how to

When you embark on restoring a room, one of your first challenges is how to carefully remove door and window trim, baseboards, and other woodwork so they can be put back later in their original positions.

#Shotgun lathe and plaster wall penetration test update

If you face major repairs to plaster walls, or plan to update plumbing or wiring, it’s often easier to remove all the woodwork first.